What Are Your Options If You Need A Wheelchair?

January 4th, 2013 by Melanie Ledbetter-Remy

A wheelchair, put simply, is a chair with attached wheels that is designed to be used as a replacement for walking, typically to compensate for a temporary or permanent handicap. Wheelchair use can help people who have become unable to walk and cannot maintain some degree of independence, especially if they do not have the upper body strength needed to stay on the move.

Though many types of wheelchairs exist, they all share some basic characteristics. Most prominently, two large wheels provide most of the chair’s propulsion. The majority of wheelchairs include at least two smaller wheels to assist with balance and steering. Other common features include foot and leg rests, rigid, durable seats and padding designed to provide stability and comfort.

Perhaps the biggest decision to make when choosing a manual wheelchair is the frame type. Rigid-frame wheelchairs are made from aluminum or titanium welded together and have few moving parts. They are designed with performance in mind and require relatively little maintenance. Rigid wheelchairs conform to the shape of the user’s body and can be pushed along with relatively little energy, making them excellent choices for independent, physically fit people with good upper body strength. For many users, the rigid wheelchair comes to be an extension of the body.

Folding-frame wheelchairs are designed to be collapsible for easy storage, but their many moving parts require more maintenance and they tend to be heavier than rigid wheelchairs. These chairs also tend to take more energy to push and do not conform as well to the user’s body. Still, folding wheelchairs are favorable for less independent users, such as very young or elderly people. For instance, long-term care settings make extensive use of folding wheelchairs.

Manual wheelchairs are great for people who have the upper-body strength to keep pushing themselves all day long or long-term caregivers to help them stay mobile. Users who want to maintain their independence despite a lack of upper-body strength, however, often choose powered wheelchairs. Powered chairs tend to be substantially more expensive and require more maintenance than manual chairs, but for some, the independence afforded by a motorized chair or scooter is well worth the cost.

A standard handicap wheelchair typically has a 16, 18 or 20-inch seat and is designed to support weights up to 300 pounds. For somewhat heavier people, extra-wide wheelchairs are available with 22 or 24-inch seats and capacities up to 400 pounds. Bariatric wheelchairs usually have 26, 28 or 30-inch seats and can support up to 700 pounds; they often feature reclining seats to distribute the user’s weight in a more safe and comfortable manner. On the opposite end of the size spectrum, pediatric wheelchairs have smaller frames, lower seats and smaller weight capacities, usually up to 250 pounds.

Although wheelchairs are often associated with fairly permanent use, there are several reasons why a user may need to rent one temporarily. For instance, an illness or injury may render someone immobile temporarily, but not for a long enough time to require purchasing a wheelchair outright. People who use wheelchairs permanently may still find it more convenient to rent wheelchairs for travel purposes than to transport their own chairs when they are on the road. For these situations, medical supply companies offer rental wheelchairs in a wide range of sizes and styles. Some frequent travel destinations, such as theme parks and resorts, offer on-site rentals as well.

Though they are not perfect, wheelchairs represent opportunities for people with limited mobility to retain some independence and live normal lives. For people with strong upper bodies, rigid-frame wheelchairs can make maintaining an active lifestyle possible. For the elderly and disabled, wheelchairs can still provide plenty of mobility. Consider all the available options and find the wheelchair that is right for you.

Freedom Baby Freedom!

October 26th, 2012 by Melanie Ledbetter-Remy
Freedom Alert

ENJOY THE FREEDOM OF INDEPENDENT LIVING

Many of us have elderly parents that want to stay in their home, but perhaps, there are fears of falling or getting so sick they can’t call for help.   I know when I call to check on my parent and the phone rings and rings, or goes to voice mail – my anxiety goes up, my heart beats faster and my palms start sweating.  Thoughts race in my mind from “Could she be in the shower, or has she fallen and can’t get to the phone, or has something terrible happened?”

We at Active American Mobility and Medical supply are continuously looking for ways to help our patients and their families live a more stress-free and safe life. I would like to introduce an item I bought for my mom that has brought Freedom from worry for me and Freedom for her to remain independent in her own home.  It is called FREEDOM ALERT. This small device has a small pendent that my mom always wears and if an emergency arises, she can press the button.  The prerecorded message is sent to the 4 custom contacts.  I used to have my number first but now the program calls 911 first and me second.  That way we don’t waist precious time and the ambulance to be on the way the same time I am.
The FFREEDOM ALERT has brought me a sense of relief and has increased her sense of security to stay in the home.  The great think about this device is there are NO monthly feed or contracts.  It’s a onetime cost and can even travel with you to different locations.  If you would like to see one, please stop by any of the 3 showrooms and try it for yourself.  Freedom from worry is well worth the time.  The Freedom Alert is the perfect Christmas gift that continues to bring peace the whole year.

Need a bath that accomodates all disabilities?

August 28th, 2012 by madams

Example of Handicap Bathroom RemodelActive American Mobility & Medical Supply has changed people’s lives by designing a new bathroom that can accommodate any handicap. The bathroom can be a difficult place to maneuver due to the size and the water factor. Please grant us the privilege to give you a free estimate to make your bathroom a safe and relaxing room.

We have made many people happy when they can roll into their shower without fear of falling or they can slowly be lowered into their bath from a safe sitting platform. Call 979-297-3155 to set up an appointment for our Home Modifications Manager to show you all the options that are available.

New Location

August 28th, 2012 by madams

We have moved – but just around the corner. New address is 12999 Murpphy Rd Suite B1, Stafford, Tx

Home Access & Ramp; Modifications

May 9th, 2012 by Melanie Ledbetter-Remy

Active American Mobility & Medical Supply is VERY excited to announce the launch of a new websites, specifically tailored specifically to your needs. This site - AA Home Access – deals directly with handicap modifications to homes and businesses.

AA Home Access is an offshoot of our company that is a full-service construction company specializing in home additions and modifications and handicap/disability modifications. From wheelchair ramps to fully remodeled bathrooms for those that might be aging, handicapped or suddenly injured, AA Home Access can do it all.

Our home and handicap modification division can make your home, office, or even your yard, easily accessible by those on crutches OR in wheelchairs. Call today for more information on updating your home to the needs of those that live in it. BE COMFORTABLE!

Case Study: Comfort Company Vicair Cushion

May 2nd, 2012 by patrick

WHEELCHAIR SEATING CASE STUDY

COMFORT COMPANY VECTOR (VICAIR TECHNOLOGY)

VS.

CROWN THERAPUETICS ROHO CONTOUR SELECT

Client Name:  John Doe Patient

Current Wheelchair: New Quickie Q7 Ultra Lightweight (2 Months Post Delivery)

Current Seating on New W/C: Adjustable Tension Back Upholstery with Roho Contour Select Cushion

Clinical Facility: Hill Country Regional Hospital-Inpatient Rehab/Wound Care Clinic

Pressure Mapping System: Vista Medical FSA UT1010-7306

History

Client is a mid-thirties male who presents with Lower Extremity Paralysis (Paraplegia) due to previous brain stem cerebral vascular accident post approximately 6 years. Slight scoliotic curve at lower/mid thoracic region. Active spasticity in bilateral lower extremities. Very good upper torso balance and very good upper extremity strength most in part from self-propelling previous wheelchair for all activities of daily living. Client lives independently in accessible modular home with son within mostly accessible subdivision and exterior environment.  Client maintains full time employment at regional hospital facility and is very active within the community. Previous wheelchair used was TiLite Titanium Rigid Frame Ultra Lightweight wheelchair with Sling seat and adjustable tension upholstery. Wheelchair cushion utilized was Jay Seating Jay 2 Standard Profile Cushion.

Previous wheelchair was in need of refurbishing as well as seating was no longer supportive in lower lumbar region, cushion was deteriorated and client was experiencing pain, discomfort and redness in right gluteal/ischial tuberosity. Client also complained of early fatigue during the course of the day.

New W/C Application

New Quickie Q7 Ultra Lightweight Wheelchair was specified and measured for proper fit. Standard equipment included: Tubular armrests, anti-tippers, clothing guard/panels and integral push handles. Optional equipment included: Flip up footboard for ease of transfers and positioning lower extremities, adjustable angle-flip down back for ease of transporting. Non-flared front end due to physical stature of client and risk of impact to frame. Flat free inserts were also supplied due to history of flats on previous w/c wheels. Cushion utilized with delivery of new W/C was Crown Therapeutics ROHO Contour Select Adjustable 4 Compartment Cushion for maximum pressure relief as well as lower extremity positioning.  Client requested adjustable tension back upholstery for adjustability and support even though a modular low profile back was discussed and recommended. New W/C was delivered in January 2012.

Post Delivery Concerns

After 2 months of daily use client made contact to discuss possible concerns of new chair and seating. Client continued to complain of pain, discomfort in right side lower torso although not as severe as previously stated. Continued fatigue late in day accompanied by lower back pain/discomfort.  Upon visual inspection of seating posture, client was found to be “sacral sitting” with posterior pelvic tilt as well as slight, right lower extremity adduction.  Client was positioned too far to back of chair. Observations made included inappropriate posterior thoracic support at lumbar and lower thoracic spine from adjustable tension back upholstery. ROHO Contour Select cushion, even though correctly inflated and adjusted for proper positioning of lower extremities was still not completely eliminating discomfort in right IT even with regular pressure relieving by client. Client was in wheelchair for approximately 8-12 hours a day and continued to be fatigued by end of work day. Client rated new wheelchair and seating at a 6-7 on a scale of 1-10 compared to previous wheelchair and seating which was ranked at 2 before new application.

Recommendations/Reevaluation

After observations and discussions it was decided to replace the adjustable tension sling back with a modular back for rigidity and extra support of lower thoracic/lumbar area thereby reducing strain and fatigue from sitting and self-propelling throughout the day. It was also decided to try a different pressure reducing/positioning cushion with the same seating medium used with the Roho Contour Select which was air. Products chosen were: Comfort Company  12” Tall Actaback with Adjustable Stays for increased lumbar support and Comfort Company Vector Cushion with Vicair technology.  Modular back was installed and positioned for client comfort as well as maximum lower thoracic/lumbar support while sitting and propelling.  Vector cushion was adjusted for lower extremity support as well as maximum pressure relief in sacral/IT areas, paying particular attention to right side compartments of cushion. A pressure mapping session was determined to be crucial in determining if there was any “loading” of client’s right side while in seated position. Client was advised to use new components while mapping system was secured for further assessment.

Client used new seating components for 2 weeks while mapping system was acquired and session was scheduled.  Upon re-evaluation of client at 2 week mark there was marked improvement in pain and discomfort in right side of seating area as well as reduced fatigue and more stamina throughout day. Upon visual inspection of client while seated and propelling, posture and pelvic positioning had improved tremendously and client was seated in slightly forward of midline position which he stated he was able to maintain throughout the day due to back support. This posture allowed client to exert maximum thrust on wheels with his upper extremities instead of relying on upper torso leverage thereby reducing fatigue and increasing stamina throughout day.

Pressure Mapping of Cushions

It was decided to proceed with the pressure mapping session to solidify the presence of increased pressure in clients right IT area while using both cushions during the mapping session to attain the best results and utilize the cushion with the most support as both were adequate for positioning of the lower extremities but the Comfort Company Vector seemed to alleviate 80-90% of pressure related pain and discomfort.

A Vista Medical FSA UT1010-7306 Pressure Mapping Interface System with FSA Flexible Pressure Wheelchair Mat was utilized for mapping sequence conducted at Hill Country Regional Hospital in the Inpatient Rehab/Wound Care Clinic with clinical staff present. Client switched to Roho Contour Select Cushion which was reassessed and inflated to proper pressures for maximum support and positioning and “pressure map” was captured.  Client then switched to Comfort Company Vector Cushion which was used with previous adjustments and currently utilized by client for daily use. The Comfort Company Vector Cushion was then “captured” by mapping sequence.

After mapping had been completed and compared it was noted that client had a moderate/severe pressure or “loading” area while seated in Roho Contour Select Cushion which was unable to be improved even with multiple adjustments to pressure within the select compartments of the cushion. On the other hand, while seated in the Comfort Company Vector Cushion, the “load” area was noted but to a much lesser extent with even distribution of pressure gradients throughout the area in question.  Both cushions were “mapped” on new Quickie Q7 with Comfort Company Actaback installed and adjusted.

Summary/Conclusion

The right combination of seating components were successfully integrated with new wheelchair frame to offer client comfort, support and correct posture while he is seated for extended hours every day.  It was discovered on further assessment that client also had a slight right side scoliosis at the mid-thoracic area which was associated with the “loading” or increased pressure on the right IT/gluteal area.  Once this condition was addressed and properly supported with modular back and lumbar support was increased to compensate for the posterior pelvic tilt, the loading area was decreased but not to the point that it was properly supported with the Roho Contour Select Cushion.  The Comfort Company Vector with Vicair Technology proved to be the better choice for client to evenly distribute surface pressure across the entire cushion area while maintaining lower extremity positioning to prevent adduction.  Client reported less pain and discomfort and more stamina with less fatigue at end of day with the combination of Comfort Company Actaback and Comfort Company Vector Cushion. Pressure mapping of both cushions clearly illustrate the right side “loading” area on the Roho Cushion versus the Comfort Vector Cushion as well as the lower overall average “pressure” gradient across the entire sitting area on the Vector compared to the Contour Select.

Results from ROHOResults from Vicair

A YOUNG BOY AND A WHEEL CHAIR

April 11th, 2012 by patrick

Active American Mobility

Justice was sitting in his driveway on a rainy Monday morning waiting for the school bus to pick him up and start the new week. His normal sitting spot while awaiting the bus was at the end of his yard next to the curb of the cul-de-sac. Today was different. It had been a rainy morning and the ground was saturated. Instead of waiting on the covered porch Justice decided to await the bus while sitting at the end of the driveway on the concrete with his backpack strapped to his shoulders and a small umbrella to protect him from the rain.
His neighbors shared a common driveway between the two homes and, on this morning, Betty, the neighbor, had to leave for work early to make final preparations for an important presentation with the board of directors. Betty’s company was struggling financially and Betty was under increasing stress of getting transferred or, worse, potentially being downsized and laid off. Betty left the house in a rush, opened the door to her Cadillac and quickly started the engine and backed out of the driveway.
She took no notice of her surroundings with the exception that she checked her mirrors and saw nothing evident through the blur of the rain covered glass. The thought did not occur to her that the elementary school bus picked up the children on her cul-de-sac at about this time each morning. After backing out of the driveway, she quickly threw the transmission into gear and accelerated toward the intersection.
At the intersection, she heard some kids yelling and carrying on but took no particular notice. Besides, the work meeting and her company’s financial position were foremost on her thoughts. Just before reaching thirty miles per hour, two children jumped in front of her car waving frantically. Betty slammed on the brakes, stopped the car, and got out thinking “What are you kids doing?” Before she could speak, one child yelled “Justice is caught on the back of your car!” and she saw the other boy run to the passenger rear corner of her fender. Betty gasped in horror as she saw a young blond boy dangling from the fender of her Cadillac, apparently caught and dragged along by his backpack for somewhere between her home and the middle of the street.
Judy, Justice’s mother, asked around to her friend who worked for a local durable medical equipment company, to see if she could get some advice on wheelchairs. Judy indicated that her son had received third degree burns and had been at Children’s hospital for the past week receiving burn treatments for damage to legs and shoulder areas. Following an extended hospitalization, Judy met with the elementary school administration who instructed her that her child needed to begin attending classes immediately or he would be required to either [1] attend summer school or [2] repeat the forth grade next year. Judy felt that in no way was her son ready to attend classes. He struggled with walking and needed to keep his left leg elevated to reduce pain and swelling.
Even though the wheel chair provided to Judy’s son was simple in design, not customized, and did not necessarily fit perfectly, Judy was grateful for the prompt service and delivery of a wheel chair that would provide a solution for her son’s immediate need.

In consideration of this story, I think about how something as seemingly simple as prompt delivery and service to a family in need of a basic item both helped in reducing the stress that this mother was going through and solved an immediate need by providing a means for Justice to attend school while his leg healed over the next two weeks.
Now project a little further into this scenario: a person, loved one, who has had a debilitating accident or progressively debilitating disease and has lost most functioning in his or her arms and legs. The miracle of the previous story is that the child survived the accident and, even during the painful recovery, remained hopeful of a full recovery in a relatively short time. Many disabled persons are not entitled to such hope. Their lives remain forever complicated by their disability and reliance upon others for assistance. Those of us who work in the rehabilitation / mobility device industry must keep our paradigms intensely focused upon client outcomes. Consequently, what many of us frequently forget is that outcomes are very much dependent upon processes. A friendly, interactive face, promises kept, and client centered customer service go al long way toward making a person’s experience positive, no matter how difficult their situation. Positive outcomes are not mutually exclusive of a favorable process. Take the case of the young boy and the wheel chair. The medical device solved the physical problem of temporary mobility; however, I would contend that the value of the customer service remained equally as important so at least the stress could be reduced by knowing and trusting fully that their mobility needs were being met.
Here at Active American, we pride ourselves on taking every individual case personally, trying our best to empathize with the client and their story through customer service and communication. It is difficult enough to admit that you are currently in a situation in life that you have to depend on equipment for mobility or actually need help from others to get through whatever the situation might be… working with a company that offers great customer service we feel is an absolute must.

by Robert Barr, ATP

Houston Medical Equipment & Supplies

February 14th, 2012 by Melanie Ledbetter-Remy

Houston Medical Equipment experts, at Active American Mobility, have the veteran knowledge to order your durable medical equipment and other medical supplies correctly the first time. Our seasoned staff can help you make good decisions on your medical supplies and equipment orders. Whether you live in Houston on Alaska, our new online store guarantees easy use and as well as a full slate of medical supplies – coming soon!

With multiple storefronts throughout the Greater Houston Area, AAMobility guarantees our products and our services. Check out our new website at http://aamobility.com.

The Complex Rehab X-Factor

December 7th, 2011 by patrick

When it comes to providing complex rehab mobility, what is your (my) advantage over other providers that have the same products and services?  What is the difference between each of us through the client’s perspective? How do referral sources look at my ability to provide the best experience and correct products to enhance the client’s quality of life?

The answers to these questions could be defined as “Rehab-X” factors that client’s, physicians, therapists and referrals will judge us by. In all cases my professional relationships and professional network is only as strong as my ability to manage each account as if each is my only account.  This skill set is something I work on daily because I’m not as gifted in time management as I should be.  If I’m able to maintain a high level of contact with my client’s and all those involved, I will certainly develop one “Rehab-X” factor that will stand on its own merits. Read the rest of this entry »

Q6 Edge Power Wheelchair: Active American Mobility

October 21st, 2011 by patrick
By Patrick Boardman
281-495-4400
Active American is pleased to announce a new product from Quantum Rehab called the Q6 Edge. This new wheelchair is a next generation chair that will meet a wide variety of power wheelchair applications. See specs below video:

FEATURES AND BENEFITS
▪ Mid-Wheel 6® allows six wheels on the ground for
maximum stability
▪ Compatible with TRU-Balance® Power Positioning
▪ Low impact OMNI-Casters (nylon, spherical-shaped casters)
on front and rear prevent wheel hang-ups
▪ ATX Suspension (Active-Trac® with extra stability)
incorporates front OMNI-Casters for enhanced
performance over more varied terrain
Options
▪ TRU-Balance® Lift & Tilt
▪ TRU-ComfortTM Seating
System
▪ Q-Logic EX Drive Controls
▪ 6 mph motor package
▪ Accu-Trac advanced
tracking technology 6
▪ Power elevating seat

FOOTNOTES:
1) Range and speed vary with user weight, terrain type,
battery charge, battery condition and tire pressure.
2) Due to manufacturing tolerances and continual product
improvement, this specification can be subject to variance
of + or – 3 %. Dimensions listed are for power base only.
Overall measurements will vary based on seating and
accessory selections.
3) Tested in accordance with ANSI/RESNA, WC Vol. 2, Section 4,
standards. Results derived from theoretical calculations based
on battery specifications and drive system performance. Testing
conducted at maximum weight capacities. This specification
can be subject to a variance of +10%, -5%.
4) Battery weight may vary based on manufacturer.
5) Optional.
6) Call for availability.
7) Available as part of Community Use package with 6 mph
motors. Increases width by 1.5”.

HCPC Codes for Q6 Edge
Q6 EDGE 3S – SS (Code: K0848)
Q6 EDGE 3S – C (Code: K0849)
Q6 EDGE 3SP – SS (Code: K0856)
Q6 EDGE 3SP – C (Code: K0857)
Q6 EDGE 3MP – SS (Code: K0861)
▪ Articulating vent tray 6
▪ Compact vent tray 6
▪ LED full lighting package
▪ 4” wide flat-free knobby
extended traction tires 6,7
▪ WC19 transit securement
package 6,8
▪ Semi-independent

Newsletter

Twitter